Face to face dimension
The robust universal bonnet can be used for a wide variety of actuator types. Many different add-on parts can be easily fitted.
A unique transverse seal, consisting of a transverse seal profile and packing compound, makes the body bubble-tight towards the atmosphere.
The transverse seal can be repacked at any time and under full pressure using the lateral packing screws.
A mechanically retained round cord seal creates a bubble-tight shut off on the gate edge.
The gate is mechanically guided over the full stroke.
In the closed end position, the gate is also mechanically supported.
With its optimized gate geometry, accumulated media is pushed out of the gate guide and flushed out into the bore by the increased flow.
The flange threads make assembly considerably easier, while also allowing for dead-end installation.
e.g. Mining slurry, Sinter water, Tailings, Process minerals, ...
MATERIAL OF CONSTRUCTION
|Body||Ni-Resist||Ductile Ni-Resist||Carbon Steel|
|Gate||17.4 PH||17.4 PH||17.4 PH|
|Topwork||Carbon Steel||Carbon Steel||Carbon Steel|
|Stem / Piston rod||430 Chrome Steel||17.4 PH Steel||430 Chrome Steel|
Other materials upon request
|Topwork||Epoxy Powder Coat, Stainless steel|
|Schrauben||B4, Stainless, B7|
- W0 with handwheel
- W0 with bevel gear
- W0 with pneumatic cylinder
- W0 with hydraulic cylinder
- W1 with handwheel
- W1 with bevel gear
- W1 with pneumatic cylinder
- W1 with hydraulic cylinder
- W2 with bevel gear
- W2 with pneumatic cylinder
- W2 with hydraulic cylinder
- W3 with bevel gear
- W3 with pneumatic cylinder
- W3 with hydraulic cylinder